How to change network card speed and duplex settings in ubuntu

If you want to change speed and duplex of your network card you have to use ethtool or mii-tool.


ethtool can be used to query and change settings such as speed, auto- negotiation and checksum offload on many network devices, especially Ethernet devices.

In ubuntu if you want to use mii-tool you have to install net-tools package.

Net-tools package includes the important tools for controlling the network subsystem of the Linux kernel. This includes arp, ifconfig, netstat, rarp, nameif and route. Additionally, this package contains utilities relating to particular network hardware types (plipconfig, slattach, mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).

In the upstream package ‘hostname’ and friends are included. Those are not installed by this package, since there is a special “hostname*.deb”.

Install required packages

sudo apt-get install ethtool net-tools

First you need to find the existing network card speed for this you can use the following command

ethtool eth0

Once you have the current speed and duplex details you can change using the following commands

If you want to setup eth0 10 or 100 or 1000 speed with ethtool try this

sudo ethtool -s eth0 autoneg off speed 10 duplex half

sudo ethtool -s eth0 autoneg off speed 100 duplex full

sudo ethtool -s eth0 autoneg off speed 1000 duplex full


If you want to make it permanent you have to add following lines to /etc/network/interfaces file

gksudo gedit /etc/network/interfaces

Add the following line

pre-up /usr/sbin/ethtool -s $IFACE autoneg off 100 duplex full

Save and exit the file

sudo networking restart


enjoy...


No comments:

Post a Comment

Find Us On Facebook

Related Posts Plugin for WordPress, Blogger... Linux Directory